GUDEL 404DLS, Руководство по эксплуатации

Страница: 93 / 137

8 Repairs
8.1 Introduction
Work sequences
Perform the work sequences in the order described. Perform the described
tasks at the specified times. This ensures a long service life for your product.
Original spare
parts
Only use original spare parts.
Ü 2
105
8.1.1 Safety
Only perform the tasks described in this chapter after you have read and un-
derstood the chapter "Safety".
Ü 2
15
It concerns your personal safety!
WARNING
Automatic startup
During work on the product, there is danger of the machine starting up auto-
matically. This can lead to severe or fatal injuries!
Before working in the danger area:
• Secure vertical axes (if equipped) against falling.
• Switch off the superordinate main power supply. Secure it against being
switched on again (main switch for the complete system)
• Before switching on the system again, make sure that no one is in the dan-
ger area
8.1.2 Personnel qualifications
Only appropriately trained and authorized technicians are allowed to work on
the product.
8.2 Repairs
Always replace the complete FlexxPump, splitter, Y-segments, or hoses with
new ones in case of defects. Send the defective FlexxPump back to Güdel for
repairs.
Repairs
OPERATING MANUAL Automatic lubrication system
FlexxPump 404DLS
99079191943154059_v10.0_
EN-US
93