Gude Expert Power Control 1100, Руководство пользователя

Страница: 20 / 23

20
Expert Power Control 1100/1101 Features
6.3
Technical information
Connections: 1 x Ethernet (RJ45)
Power Port:
1 x CEE 7/4, 230 VAC, max. 16A (1100)
or 1 x IEC C13, 230 VAC, max. 10A (1101)
Power supply inlet:
1 x CEE 7/4, 230 VAC, max. 16A (1100)
or 1 x IEC C14, 230 VAC, max. 10A (1101)
1 x Sensor Connector (mini DIN)
Network: 10/100 MBit/s 10baseT Ethernet
Protocols: TCP/IP, HTTP, SNMP v1 and v2c, SNMP traps, Syslog, E-Mail
Switched Power (total): 10 A (~ 2000W) (1101)
16 A (~3000W) (1100)
Switched Power (per port):
10 A (~ 2000W) (1101)
16 A (~3000W) (1100)
Operating temperature: 0°C-50°C
Dimensions: 120 mm x 95 mm x 65 mm (L x H x W)
Weight: ca.300g
6.4
Factory settings
In order to restore the default settings the device must be started in bootloader mode. Besides that the program GBL_Conf.
exe is required.
Run GBL_Conf.exe and select the device whose settings should be restored. Then click on Program Device -> Reset to Fab
default.
Please notice that all current settings will be deleted. The default settings will be loaded when the firmware of the device is
restarted the next time.
7 Support
In case of further questions, about installation or operation of the device, please have look at www.gude.info/wiki or do not
hesitate to contact our support (mail@gude.info).
8 Contact
Gude Analog- und Digitalsysteme GmbH
Eintrachtstraße 113
50668 Cologne
Germany
Phone: +49-221-912 90 97
Fax: +49-221-912 90 98
E-Mail: mail@gude.info
Internet: www.gude.info
Managing Director: Dr.-Ing. Michael Gude
District Court: Köln, HRB-Nr. 17 7 84
WEEE-number: DE 58173350
Value added tax identification number (VAT): DE 122778228