Gude Expert Net Control 2304 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 87

Gude Expert Net Control 2304 Скачать руководство пользователя страница 46

46

Expert Net Control 2304

© 2021 GUDE Systems GmbH

Configuration

3.6

Sensors

Sensor: Selects a type of sensor to configure it. The first digit "1" indicates the number
of the sensor port (only important for devices with more than one sensor port). This is
followed by the sensor name, and the changeable sensor name.

Sensor Name: Changeable name for this sensor. Temperature and humidity can have
different names, even if they are from the same sensor.

Select Sensor Field: Selects a data channel from a sensor.

Enable ... Messages: Enables the generation of sensor messages.

Maximum/Minimum value: Here you can choose whether, and at what Maximum/Min-
imum temperature or humidity measurements limits the alerts are send via SNMP
traps, syslog or E-Mail.

Hysteresis: This describes the margin of when an event is generated after the meas-
ured value has crossed the chosen limit.

Message channels: Enables the generation of messages on different channels.

Console push-messages

:

This option allows the output of sensor values on the con-

sole at a configured time interval, or when a certain threshold has been reached.

«
...
44
45
46
47
48
...
»

Содержание Expert Net Control 2304
























































































Отзывы:

Нет отзывов