GÜDE Expert Power Control 8041 Series Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 118

background image

21

Expert Power Control 8041/8045

© 2022 GUDE Systems GmbH

Operating

Enter Bootloader Mode: Jumps into bootloader mode, where additional settings can be
made with GBL_Conf.exe.

Flush DNS Cache: All entries in the DNS cache are discarded and address resolutions
are requested again.

Config/Status View: status.html: Displays the status.html page with the JSON data.

Config/Status Download: export.json: Direct file download of JSON data from status.hml.

2.3.2

Configuration Management

The device configuration can be saved and restored in the maintenance area

.

The "Config File Export" function can be used to save the current configuration as a text
file. The syntax used in the configuration file corresponds to the commands of the Telnet
console. If the configuration of a device is to be restored from a text file, load the file with
"Upload" and restart the device with "Restart Device".

Saving the configuration should only be carried out in an SSL connection, since it

contains sensitive password information (even if it is encrypted or hashed). For the same
reasons, it is advisable to carefully handle the generated configuration files when archiv-
ing.

Editing the configuration file

It is possible to customize a saved configuration file with a text editor for your own
needs. For example, one scenario would be to use a script language to automate the
creation of many customized versions of a configuration, then equip a large number of
devices with an individualized configuration. Also Upload and restart with CGI commands
can be done in scripting languages. With use of the comment sign "#" you can quickly
hide single commands or add personal notes.

If you modify a configuration file manually, it is not always clear which limits are allowed
for parameters. After uploading and restarting, commands with invalid parameters are ig-
nored. Therefore, the generated configuration includes comments describing the bound-
aries of the parameters. Where "range:" refers to a numeric value, and "len:" to a text
parameter. E.g:

email auth set 0 #range: 0..2

email user set "" #len: 0..100

The command "system fabsettings" from the beginning of a generated configuration file
brings the device into the factory state, and then executes the individual commands that

20

«
...
19
20
21
22
23
...
»

Содержание Expert Power Control 8041 Series























































































































Отзывы:

Нет отзывов

Похожие инструкции для Expert Power Control 8041 Series

Expert Power Control 8291

Бренд: GÜDE Страницы: 91

Expert Power Control 8031 Series

Бренд: GÜDE Страницы: 98

Бренд: SCHUNK Страницы: 28

Бренд: DONGAH ELECOMM Страницы: 47

COPIER GUARDIAN II

Бренд: SmartPower Страницы: 4

Бренд: ABB Страницы: 322

Бренд: Unipower Страницы: 16

Бренд: Victron energy Страницы: 18

Бренд: TOWA Страницы: 552

Бренд: Tripp Lite Страницы: 2

Бренд: Tripp Lite Страницы: 20

Бренд: Tripp Lite Страницы: 20

Бренд: Tripp Lite Страницы: 60

Бренд: Tripp Lite Страницы: 76

Бренд: Interlogix Страницы: 4

Бренд: CyberPower Страницы: 2

Бренд: CyberPower Страницы: 14

Бренд: CyberPower Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды