Guardian Telecom Inc.
Installation and Operation
Model PSCU
Page 9
LED displays:
* Record LED: Digital Recorder ready display
* Pilot LED: Pilot Tone Generator in use display
* Backup LED: Backup Amplifier fail display
* RF fail LED: RF transceiver fail warning display
The following LED displays are integral to the Alarm switches.
* Oil LED (Alarm #1)
* Major LED (Alarm #2)
* Fire LED (Alarm #3)
Switches:
A. Alarm switches
There are three optional Alarm activating switches and one Alarm Reset switch.
The Oil (#1), Major (#2), and Fire (#3) Alarm switches are illuminated switches.
B. Push to Page switch
The Push to Page (PTP) switch is a heavy duty shrouded switch. Pressing the PTP switch will
activated the Microphone and the MIC Pre-amplifier.
Microphone:
The goose neck Microphone is the Paging Microphone that is designed to override telephone
accessed paging. Pressing the PTP switch will enable the Microphone and the Microphone
Pre-amplifier. A control signal from the PTP switch will activate a Digital Recorder (if
equipped).
Speaker and Volume Control:
The built-in speaker monitors the paging system output (from any activated zone). Its output is
controlled by the Volume Control Potentiometer.
