/
KATO COLLAR INSTALLATION
Start by
loosening the front laces and/or the side straps
which attach the front and the back of the shoulder pads.
Slide the right or left side of the collar from the bottom of the shoulder pad
making sure the back of the collar is
in line with the back of shoulder pads. Next,
compress and rotate opposite side of collar squeezing into the
center of the neck opening
of the shoulder pad and as far back as possible.
Be sure the t
op of the collar fits over top of the entire shoulder pad
.
Flip the shoulder pads over
so they are in the upright position with the collar in place.
Check to see that the collar is centered correctly in the neck
of the shoulder pad and as far back as possible in the
neck opening of shoulder pads. If not, move the collar by sliding one direction or the other to correct position and it’s
equal on each side.
Once the correct position has been attained, turn shoulder pad back over and
attach the flange velcro on the collar
to the under side of the shoulder pads.
If needed, you can place the included velcro on the pads (but be sure it’s in
place first as the velcro is very sticky!)
More pictures of installation and FAQs can be found at guardianathletics.com/kato
1
2
3
4
PROTECT
/
PERFORM
/
RECOVER
1409 Riverfront Drive / Suite 201 / Mankato MN 56001 / 833-451-KATO
