GU ELTRAL VAN, Руководство по сборке и эксплуатации

Страница: 46 / 56

46
Locking drive
Assembly and operating instructions
ELTRAL VAN
10.2013 | G28230 | Printed in Germany
DE EN
„ „ Now switch the control voltage to the „CLOSE“ position. The locking
drive moves to the „CLOSE“ position and the deadbolt of the locking
drive closes..
„ „ Screw the striker plate back on.
Ensure for smooth running of the window sash.
„ „ Hang the window drive onto the window sash.
Carry out the mechanical settings according to the mounting
instructions of the window drive and check the trouble-free operation of
the locking sequence.
4.2 Setting the travel and the operating mode
Travel and operating mode are set via DIP switch.
The factory setting of the VAN locking drive is “18 mm travel” and operating
mode “with chain drive”.
The DIP switches are located behind a plastic cover (see section „ELTRAL
VAN locking drive“ on page 40).
Procedure for setting the DIP switches
„ „ Make sure that the locking drive is located in the „CLOSE“ position.
„ „ Remove the plastic cover via the opening using a tipped object.
„ „ Move the DIP switches to the desired position.
„ „ Press the plastic cover back into the housing.