1
2
Remove hardware from struts and take off
canopy. Retain hardware. You will need it
later.
Remove hardware from gutters. Retain
hardware from gutters. You will need it later.
Remove gutters by sliding them upward.
WILL FIT YAMAHA DRIVE 2
(2017-UP)
installation instructions
gtw mach rear flip seat
mach 1 steel : 01-176, 01-177, 01-178
mach 2
aluminum
: 01-179, 01-180, 01-181
included:
Pack 1
6 - 10x25mm hex bolt
12 - 10mm flat washer
6 - 10mm lock nut
2 - 8mm lock nut
2 - 10x90mm hex bolt
4 - 10mm flat washer
2 - 10mm lock nut
2 - 6x35mm hex bolts
2- 6mm flat washers
2 - 6mm fender washers
2 - 6mm lock nuts
Pack 2
6 - 10x70mm hex bolt
2 - 10mm countersunk #3 bolts
14 - 10mm flat washers
6 - 10mm lock nuts
2 - rubber spacers
2 - 10mm acorn nuts
Pack 3
4 - 6x25mm hex bolt
4 - 6mm lock washers
4 - 6mm flat washers
Pack 4
2 - 10x45mm hex bolt
4 - 10mm flat washers
2 - 10mm lock nuts
Pack 5
8 - 8x35mm countersunk bolts
HARDWARE
Main Brackets
Bagwell Brackets
