GTS DWG (BL) 13/7-2 ZE, Инструкция по установке и эксплуатации

Страница: 81 / 88

Page 81 Issue 07/2011
Transport and storage
Generator
9 Transport and storage
Note
►
Transport and store the generators and the switch cabinets in
a dry space and protect against water.
►
Only transport or store the generator in the as-delivered
condition with packaging and safety devices attached.
9.1 Generator
Generators in the factory are bolted down for transport on a pallet and are
packaged to protect them from damage and moisture ingress.
Lifting eye screws have been attached to the generator to secure the lifting
equipment. Secure the lifting equipment to the generator exclusively using
this ring screws. Only use suitable lifting equipment.
If ring screws are not attached to the generator in the factory, they must be
subsequently attached in order to lift the generator.
2-pole generators
DWG (BL)
13/7-2 ZE
DWG (BL)
17/7-2 ZE
DWG (BL)
23/12-2 ZE
DWG (BL)
30/15-2 ZE
DWG (BL)
40/14-2 ZE
Weight approx. 65 kg 84 kg 121 kg 153 kg 184 kg
4-pole generators
DWG (BL)
13/7-4 ZE
DWG (BL)
17/7-4 ZE
DWG (BL)
23/12-4 ZE
DWG (BL)
30/15-4 ZE
DWG (BL)
40/14-4 ZE
Weight approx. 86 kg 130 kg 153 kg 178 kg 205 kg