GTS BG 132, Инструкция по установке и эксплуатации

Страница: 15 / 128

Page 15 Issue 05/2013
Description
Models (BG 132 and BG 160)
4 Description
4.1 Models (BG 132 and BG 160)
Depending on their nominal output and number of poles, the generators
are constructed in two different versions: BG 132 model means 132 mm
measured from the base up to the shaft center; and 160 mm for model 160.
BG 132 model
y
2-pole generators
(drive speed 3000 1/min) with rated output of 3.2 kVA up to 20 kVA
These generators come in a brushless version or with carbon brushes.
Depending on the type of installation, generators of model 132 can be
constructed as single-bearing or dual-bearing generators. Single-bearing
generators are designed for direct attachment to the drive unit. Here, the
bearing of the drive unit then operates as a second bearing.
y
4-pole generators
(drive speed 1500 1/min) with rated output of 5 kVA up to 15 kVA
These generators are only constructed as a brushless version. Depending
on the type of installation, generators of model 132 can be constructed as
single-bearing or dual-bearing generators. Single-bearing generators are
designed for direct attachment to the drive unit. Here, the bearing of the
drive unit then operates as a second bearing.
Model 160-BG 160
y 2-pole generators (drive speed 3000 1/min)
from a rated output of 20 kVA up to 40 kVA
y 4-pole generators (drive speed 1500 1/min)
from a rated output of 10 kVA up to 40 kVA
Model 160 generators are only available as a brushless version, and are only
constructed as dual-bearing generators
Dual-bearing generators are usually installed near the drive unit. There are
a range of options for providing drive power to the generator.
Ö
Drive types, page 25