ACCESS
SYSTEMS
GTO Driveway Alert
I N S T A L L A T I O N M A N U A L
Kit Includes:
• Transmitter
• Receiver
• Two Size C batteries.
• GTO Driveway Alert installation manual for general installation guidance.
Rev. 01/29/08 • Printed in China for GTO, Inc.
Transmitter
Receiver
How it works:
The Transmitter:
The Operating Voltage for the Transmitter is 3V from two batteries (LR14C 1.5V) inside the Transmitter.
There is no Power Switch for this unit. Once the batteries are installed, the unit starts to function.
The Receiver:
The Receiver is powered by external Power Adaptor ( AC120V 60Hz / DC 12V 100 mA). A rotary switch controls
the alert buzzer’s volume on the receiver. There are three LEDs on the front Panel of cabinet, representing Power
(red), Visitor Alert (green) and Low Battery (red). A “RESET” button in black on Front Panel is used to clear the
alert LED after it registered passing vehicles.
Thank you for purchasing the GTO Driveway Alert. Please read the directions carefully and completely before installing.
For more information on GTO's full line of automatic gate openers and access controls visit our website at www.gtoaccess.com
