DISPOSAL
25
GMG-200
310-2310-001 EN20
12.4 Trolley
Attaching wheels
1
Place the handle upright on the wheels.
2
Roll the handle up to the case.
3
Hold the case at a slight angle, slide the underside of the han-
dle under the case, then lower the case again.
4
Hold the “Push” button, allow the handle to snap into the upper
holder on the case, then release the “Push” button.
vv
Extending and retracting handle
1
Hold onto the handle and press the button on the top.
2
Hold down the button and pull up the handle track by track or
press it down.
3
Release the button and lock the handle into place at the de-
sired height.
vv
12.5 Calibration
TIPS AND RECOMMENDATIONS
Send the GMG-200 to the plant at least once a year to be calibrated!
13 Disposal
Return the device to the manufacturer when it reaches the
end of its serviceable life. The manufacturer will ensure that
the components are disposed of properly, in an environmen-
tally friendly manner.
