GTE ADICOS M-BUSMASTER S, Руководство по эксплуатации

Страница: 12 / 19

DESIGN
10 420-2410-002 EN11 ADICOS M-BUSMASTER S
4.2.2.2 Model “RS-232”
RS-232 connection socket
On the respective models, the RS-232 socket for the serial interface
is in the middle of the interface side of the device, above the
power supply connections.
4.2.2.3 Model “Ethernet”
Ethernet connection socket
On the respective models, the Ethernet socket for the network
cable is in the middle of the interface side of the device, above the
power supply connections.
Drivers and notes on installation can be found on the includ-
ed data medium!
4.3 Display Elements
Status LEDs
The status lEDs of the ADICOS M-BUSMASTER S are located in the
middle of the end panel on the field supply side. They indicate the
following
(from top to bottom)
:
vv
Red
40 V bus voltage okay
Red Overload / M-Bus short-circuit
Yellow
Detector data is being received
(RX) (Detector
→
PC)
Green
Detector data is being transmitted
(TX) (Detector
→
PC)