GTC REVPAD Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 91

GTC REVPAD Скачать руководство пользователя страница 15

9

Welcome to the Creative World of the GTC Sound Innovations REVPAD

RF Exposure Warnings

Mobile Device RF Exposure Statement

Mobile Device definition:

a Mobile: (§2.1091) (b)

A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such
a way that a separation distance of at least 20 cm / 8” is normally maintained between the transmitter’s radiating structure(s) and the
body of the user or nearby persons.

Per §2.1091d(d)(4)

In some cases (for example, modular or desktop transmitters), the potential conditions of use of a device may not allow easy clas-
sification of that device as either Mobile or Portable. In these cases, applicants are responsible for determining minimum distances
for compliance for the intended use and installation of the device based on evaluation of either specific absorption rate (SAR), field
strength, or power density, whichever is most appropriate

RF Exposure

This device is only authorized for use in a mobile application. At least 20 cm / 8” of separation distance between the REVPAD and
the user’s body must be maintained at all times.

«
...
13
14
15
16
17
...
»

Содержание REVPAD




























































































Отзывы:

Нет отзывов