GTC Sound Innovations REVPAD Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 85

GTC Sound Innovations REVPAD Скачать руководство пользователя страница 51

Follow the procedure below to set up REVPAD system to toggle Freeze mode on and off.

1.

Assign Freeze (

Frz

) to a Control Button or Control Button pair on the Touchpad.

Touchpad Control Button Assignment

for more information.

2.

Activate Freeze mode by pressing the assigned Control Button or Control Button pair. Both the FREEZE and NORMAL LEDs on
the base unit front panel will be illuminated.

Status and Mode LEDs

for more information.

3.

Press the assigned Control Button or Control Button pair again to exit Freeze mode.

Note:

You can go to

p3

of the patch setting to set freeze on or off.

for more information.

Patch Favorite Mode

Setting Patch Favorites

on the next page

for instructions on how to create sets of patches you can access by pressing a Touchpad

Control Button or Control Button pair and then tapping a specified area of the touchpad.

When Patch Favorite Mode is active the PATCH LED on the base unit front panel illuminates.

Status and Mode LEDs

for more information.

Note:

If you have chosen

Select Only

in Pad Settings for

FAVORITE MODE FUNC:

, the editing screen on the base unit continues to display

the Patch Favorite set. You may play using the selected patch but pressing the touchpad will change the patch. Press the Touchpad Control
Button again to remove the display. If you have selected

Select and Play

touching the touchpad makes the patch selection immediately

and exits the mode.

Touchpad Control Button Assignment

for more information.

35

Customizing your REVPAD

«
...
49
50
51
52
53
...
»

Содержание REVPAD






















































































Отзывы:

Нет отзывов