GTC Sound Innovations REVPAD, Руководство пользователя

Страница: 42 / 85

REVPAD User Manual
Creating and Editing Patches
Your REVPAD comes loaded with a wide variety of patches, each with up to eight effects, which you can modify as you wish. Or you
can create new ones with a variety of effects that come with the REVPAD. This tutorial describes a step-by-step procedure to create a
new patch by scrolling through effects, adding them, and customizing their parameters.
Note: When adding effects remember that the order of the effects in the patch is important.
SAVE SYS X-Y
X Y X Y X Y X Y
| | | |
|
C B
D
A
SAVE SYS X-Y
X Y X Y X Y X Y
|DIST | | |
E
G F
H
1
P
01A: EMPTY
1
P
01A: EMPTY
1. Rotate the Navigation Roller (
A
) to scroll through patches (
B
)
until you see a blank editing screen (
C
). The down arrow will
glow yellow (
D
).
2. Press (
E
) on the Navigation roller to enter the first effect block
(
F
).
Note: The Up, Right, and Down arrows now glow, indicating available
navigation directions.
3. Rotate the Navigation Roller (
G
) to scroll through the list of
available effects until you find one you wish to add. In this
tutorial a distortion effect (
DIST ) is added.
4. Press (
E
) on the Navigation roller to set parameters for this
effect.
Note: To accept the default parameters and continue adding more
effects to this patch press (
H
).
26