Page 24
Terminal Setup
Configuring Network Settings
Wired network and Wi-Fi (when fitted) are configured through the settings menu. Selecting one of these
items will open a further dialogue where the settings can be entered.
Note:
When selecting Wi-Fi, wireless must be enabled to see available networks.
Enable and Configure Wi-Fi
1.
Enter terminal set up (press admin icon).
2.
Enter PIN (the default is 1905).
3.
Select settings.
4.
Select Terminal & internet.
5.
Click Wi-Fi option.
6.
Click ‘Use Wi-Fi’ to toggle Wi-Fi on/off.
7.
Toggle turns green and (after a few moments)
displays available networks.
8.
Select chosen network, enter details and click
connect.
9.
If the network you require is not listed select ‘Add
network’ to add a network connection manually.
10.
Select Wi-Fi preferences to configure automatic
reconnection etc.