11
Chapter
4
Connecting
the
GXCAM
HICHROME-MET camera to a PC
1. Use the USB cable to connect the the GXCAM HICHROME-MET camera to
the PC.
2. Plug in the 12V/2A power supply. Press and hold the ON/OFF key until blue
light is on to turn on the camera.
3. No driver installation is needed when connected to PC. Install software to
adjust parameters and acquire images.
Cleanliness
When the camera is NOT in use, please screw in the dustproof cap to avoid
the dust from the environment accumulating on the optical port.
When get dust accumulates on the surface of the optical port, we recommend
using a blower bulb to blow away the dust first. If it is still there, please use a
very soft lint free cloth (Micro Fiber cloth) with absolute ethyl alcohol or a
similar cleaning agent to gently clean the surface.
If you find the dust inside the camera, please DO NOT open the camera case.
Please contact our support team to get further advice.
Maintainance
If the camera needs repair, please contact our customer support team. Do
not open the camera case.
CAUTION
：
Please DO NOT open the camera case and assemble it back by
yourself. If you open the camera, it will attract dust and moisture inside the
cameras. Any sensor scratch or moisture issue brought by opening the camera
case yourself is not covered by the warranty.