GT-SL1
Safety Information
WARNING
:
□
Risk of fire/electric shock. If not qualified, consult an electrician
□
Disconnect power at fuse or circuit breaker before installing or servicing
CAUTION:
□
Connect fixture to a 120-volt, 60Hz power source. (Any other connection voids warranty.)
□
Fixture should be installed by persons with experience in household wiring or by a qualified electrician. The
electrical system and the method of electrically connecting this fixture to it must be in accordance with the
National Electrical Code and local building codes.
□
Suitable for wall mount or eave mounting onto recessed or mounted electrical boxes rated for wet locations.
Not suitable for ground mount installation.
□
DO NOT remove the protective LED lens.
□
DO NOT look directly at lighted LEDs for any length of time.
□
DO NOT leave bare wires exposed outside the wall canopy enclosure.
□
For proper operation and protection against damage, the motion sensor head adjustment knobs must be
facing the ground.
□
DO NOT mount below 5 feet.
IMPORTANT SAFETY INFORMATION:
When using product, basis precautions should always be followed, including the following:
□
Read and follow these instructions.
□
Heed all warnings, including below warnings AND those included on product.
□
Save these instructions and warnings.
□
For outdoor use only.
□
Disassembling your fixture will void the warranty.
□
Your fixture is prewired and preassembled for easy installation.
Pre-Installation
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30~45 minutes.
Select the installation location carefully. Do not install in areas having pedestrian or motorized traffic, pools or bodies
of water, or trees/bushes that move in the wind. All of these may trigger the motion sensor security light and may be
