GST GST102A, Инструкция по установке и эксплуатации

Страница: 15 / 43

GST102A/GST104A/GST108A/GST116A
Conventional Fire Alarm Control Panel
Installation and Operation Manual
Page
10
REPEATER OUTPUT
Z8 Z7 Z6 Z5 Z4 Z3 Z2 Z1 FLT F
IR
E
M
U
T
E
0
V
PW
R
E
S
E
T
IN
P
U
T
E
V
A
C
IN
P
U
T
S
IL
E
C
E
IN
P
U
T
FAULT
NC COM NO 1
DIS./SUP
NC COM NO
ALARM SOUNDER OUTPUT AUX
2 3
Z1
ZONE
INPUT
Z2
Z5
Z4
Z7
Z8 Z6
Z3
Fig. 1-4
 FAULT (NC, COM, NO): Fault output terminal.
 DIS. / SUP. (NC, COM, NO): Disable/supervisory terminal.
 ALARM OUTPUT (-, +): Alarm output terminal.
 SOUNDER OUTPUT (1~3) (-, +): Sounder output terminals.
 AUX SUPPLY (-, +): Auxiliary power terminal.
 REPEATER OUTPUT (Z1~Z8): Output terminals of repeater panel for zone 1 to 8.
 FLT: Fault terminal for repeater panel connection.
 FIRE: Fire alarm terminal for repeater panel connection.
 MUTE: Mute terminal for repeater panel connection.
 0V: Power supply negative terminal for repeater panel connection.
 PW ON: Reserve terminal for repeater panel connection.
 RESET INPUT: For remote operation of reset.
 EVAC INPUT: For remote operation of EVAC.
 SILENCE INPUT: For remote operation of silence.
 ZONE INPUT (1~8): Zone 1 to 8 input terminals.
1.5.2
Terminals on Extension Board
Note: The contents of italics are not covered in EN54-2/4.
Terminals on the extension board are shown in Fig. 1-5 and Fig. 1-6.
9
ZONE INPUT
11 12 10 13 14 15 16
Fig. 1-5
REPEATER OUTPUT
Z
11
Z
10
Z
9
Z
12
Z
13
Z
14
Z
15
Z
16
0
V