30307503
Issue 1.01
Features
Alarming by pressing, reset by a special key
Plug-in
structure
Designed to comply with EN 54-11
Description
DC-9204 Innovation Manual Call Point (MCP) is
non-addressable. It alarms by the current caused by
pressing the action plate. It can be simply connected
to compatible conventional fire alarm system from
various manufacturers. This MCP is suitable for public
places. When there is fire, pressing the action plate on
this MCP can send alarm signal to compatible
conventional fire alarm control panel.
Connection and Cabling
Terminals on the MCP base are shown as Fig. 1.
I+ I- O+O-
60mm
Fig. 1
I+, I-: Input signal, connecting with compatible control
panel or the previous MCP.
O+, O-: Output signal, connecting with the next MCP.
Recommended Wiring
0.5mm
2
or above fire cable, subject to local codes.
Installation
The conduit can be surface mounted or flush
mounted.
Surface mounting:
First install the back box onto the wall using 4 screws,
then install the base onto the back box. Connect
cables to corresponding terminals as described above.
Hook the juts of the MCP body to the base, and then
press the part below the action plate to combine them
completely. Fig. 2 shows surface mounting.
Flush mounting:
Install the base onto the back box. Then combine the
enclosure and base the same as surface mounting.
Fig. 3 shows flush mounting.
Base
MCP
Body
Back
Box
Fig. 2
Base
Back
Box
MCP Body
Fig. 3
Application
Application of the MCP is shown in Fig. 4.
Output-
Compatible Fire Alarm
Control Panel
Alarm Zone
O-
O+
I-
I+
To the next device
MCP
Fig. 4
Usage of the key
Vertically insert the key into the key-hole, then push it
with force and turn it clockwise. Turn the key back and
pull it out when the action plate is rebounded.
The Intelligent Solution
DC-9204
Innovation Manual Call Point
0832-CPD-0789
548g/03
報
E-MAIL: [email protected]
