- 6 -
STI 1932 CT
2
g
eneral
information
2.1 P
aCking
Contents
1 STI 1932 CT
1 LAN cable
1 Brief assembly instructions
2 Mains cable
2.2 m
eaning
of
the
symbols
used
Important note
Disconnection, all power plugs
Danger by electrical shock
—>
General note
•
Performing works
2.3 t
eChniCal
data
The devices meet the following EU directives:
2011/65/EU, 2014/30/EU, 2014/35/EU
The product fulfils the guidelines and standards for CE labelling (page 49).
Unless otherwise noted all values are specified as "typical".
Input data
Over all input data rate/interface (∑ lines 1-16/17-32): .......... ≤ 800 MBit/s
Buffer memory .......................................................................60 kBit/line
(corresponds e.g. at 50 MBit/s to approx. 1 ms buffer)
IGMP ................................................................................................V2
Protocols: .......................................................... UDP (User Data Protocol),
RTP (Real-Time Transport Protocol)
RF output QAM
Frequency range: ............................................. 42.0 MHz … 868.0 MHz
Types of modulation: ..................................QAM 4, 16, 32, 64, 128, 256
Output level: ......................................................................73…89 dBμV
Dynamic phase error: ................................................................... < 0.2 °
MER: ............................................................................................45 dB
Output impedance: .........................................................................75 Ω
Symbol rate: ................................................................ 1000…7500 kBd
