GSS PTIM 1000, Инструкция по сборке

Страница: 38 / 42

- 38 - PTIM 1000
Pid
monitoring
The factory default of the PID monitoring is switched on.
If particular PIDs are not descrambled the CI module is reset. Additionally
dropouts may occur if several services are descrambled. To prevent this the
PID monitoring can be switched off.
Bx 4A
PID Check CA
on
• Use the buttons to switch " off " or " on " the PID monitoring.
• Press the button.
—> The "CA module" – " CA " menu is activated.
Ca
module
The menu varies according to which CA module you are using. For this rea-
son, please refer to the operating manual of your particular CA module. The
relevant information is shown in the display of the head-end station. This may
appear as a fixed display or as scrolling text according to display capabilities.
Bx 4A
Menu <=
CA
=> Edit
—> By pressing the button you can skip the "CA module" –
" CA " menu and activate the "Output data rate" – " DATARATE " menu
(page 34).
• Press the button to activate the " MENU " menu of the CA module.
Bx 4A
Menu <=
CA
=> Edit
Bx 4A 01/03
Information *) MENU Bx 4A TV X
. . . . 04/09
Å
Ï
M
Bx 4A TV X
. . . . 04/09
Å