- 29 -
PTIM 1000
lan
data
r ate
In this menu you adjust the LAN output data rate.
Bx 4A
LAN RATE
auto
• Press the
buttons to position the cursor under the digit of the data
rate to be set.
• Using the
buttons set the desired data rate (2 MBit… 80 MBit,
"auto").
—> The sum of the data rates of the lines A + B must not exceed 80 MBit
• Press the
button.
—> The "Input channel" – "
INPUT
" menu is activated.
i
nPut
Channel
Once the RF receiving stage has synchronised to the input signal, "
OK
" is
displayed.
If "
– –
" appears in the second line of the display, there is no input signal
present. Check the configuration of the antenna system and the head-end sta-
tion as well as the preceding settings of the cassette.
Bx 4A
C30 (546.0)
INPUT
OK
• Use the
buttons to set the desired input channel ("
C5
" …"
C12
",
"
C21
" … "
C69
").
—> Beside the input channel set the relevant input frequency is dis-
played.
• If necessary use the button to activate the menu item "Fine tuning".
—> "
0
" is displayed instead of the frequency display.
Содержание PTIM 1000
Страница 1: ...Assembly Instruction PTIM 1000 ...
