GSS PROFESSIONAL PSCU 6000, Руководство по сборке, Страница: 11 / 26

- 11 - PSCU 6000
—> The info channel is not available.
• Push the cassette cover from the back of the cassette into the guides and
fasten it with the 3 screws S (see page 8).
3.2 i
nstalling the Casset te
– Ensure the head-end station is mounted so it will not be able to vibrate.
Avoid, for example, mounting the head-end station onto a lift shaft or any
other wall or floor construction that vibrates in a similar way.
– Before installing or changing a cassette unplug the power cable from the
mains power socket.
– To ensure a higher measurement accuracy, heating up of the cassette
should be kept as low as possible. Therefore we recommend to fit the
cassette into the first slot of the head-end station.
• Remove the fastening screws 1 of the first slot from the bracket of the head-
end station.
• Insert the cassette in this slot and push it into the housing.
• Align the cassette and apply slight pressure to connect it to the connections
of the board and the HF bus bar.
• Fasten the cassette with the screws
1
.
KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE KASSETTE
AUSGANG
max. 90 dBµV
ACHTUNG!
Vor dem Kassettenwechsel
unbedingt denNetzstecker ziehen.
CAUTION!
Before changing cassettes remove
mains plug.
Grundig SAT S y st e ms
1
1