GSS Professional PADE 7006, Руководство по сборке

Страница: 26 / 28

- 26 - PADE 7006
Saving settings
Ê UÊ *ÀiÃÃÊÌ iÊ button.
—> Return to "Selecting the cassette" (page 14).
—> The settings are saved.
Note:
– By pressing the ÊLÕÌ̜˜]ÊޜÕÊ܈ÊLiÊÀiÌÕÀ˜i`Ê̜ÊÌ iʓi˜ÕʈÌi“ "Setting
the Ethernet parameters" (page 14) without saving the programmed data.
6 Final procedures
After installing the head-end station, upgrading accessories or installing cas-
settes it is necessary to tighten all cable connections, cable terminals and cover
screws in order to maintain compliance with current EMC regulations securely.
Ê UÊ -iVÕÀiÞÊ̈} Ìi˜ÊÌ iÊV>LiÊLœÌi`ÊVœ˜˜iV̈œ˜ÃÊÕȘ}Ê>˜Ê>««Àœ«Àˆ>Ìiʜ«i˜‡
ended spanner.
Ê UÊ œÕ˜ÌÊÌ iÊvÀœ˜ÌÊVœÛiÀʭðÊ>ÃÃi“LÞʈ˜ÃÌÀÕV̈œ˜ÃʜvÊÌ iÊ i>`‡i˜`ÊÃÌ>̈œ˜®°
6.1 Combination with other cassettes
- The transport stream provided at the ASI output can be transferred via the
ASI input of a following cassette to a modulator. If no signal is supplied
>ÌÊÌ iÊÌ՘iÀʈ˜«ÕÌÃʜvÊÌ ˆÃÊV>ÃÃiÌÌi]ÊÌ iÊvœœÜˆ˜}ÊÃiÌ̈˜}ÃʓÕÃÌÊLiʓ>`iÊvœÀÊ
INROUTE and OUTROUTE:
For example cassette PHDQ 1000 ASI LAN:
At INROUTE setting "A+ASI=1 B+ASI=2" OUTROUTE must be set to
"1=>ASI ASI=>MA " or "2=>ASI ASI=>MB ".
or
at INROUTE setting "A+B+ASI=1 ASI=2" OUTROUTE must be set to
"1=>ASI ASI=>MA ".