GSS PHIS 1000 S, Инструкция по сборке

Страница: 28 / 46

- 28 - PHIS 1000 S
—> The "Setting the LNB oscillator frequency" – " LNB " menu is acti-
vated.
lnb
osCill ator frequenCy
/
Control voltage
In this menu set the oscillator frequency of the LNB used and, if necessary, a
LNB control voltage.
Bx 4A
10600 MHz LNB
off
lnb
osCill ator frequenCy
• Use to position the cursor under the digit to be set for the frequency
display.
• Press to enter the oscillator frequency of the LNB used.
d
i
se
q
C
tm
Comm ands
• In order to set a DiSEqC
TM
command, position the cursor under "off" using
button .
• Using buttons select the desired control voltage.
"abcd" are place-holders for the following setting options:
Bx 4A
10600 MHz LNB
abcd
Place-holder Value Description
a _ No function
T Sound
D DiSEqC
TM
b _ No function
A, B Sound A or B
0…F Hexadecimal value for DiSEqC
TM
command
0…15
c: H Horizontal polarisation
V Vertical polarisation
d: h High-Band
l Low-Band
Example: DAHh means D iSEqC TM position 10 , H orizontal h igh