- 29 -
HDTV 1000 S
Setting the input symbol rate
• Using the
button the symbol rates
27500
" or "
22000
" can be
selected directly.
• To set other symbol rates use the
buttons to position the cursor under
the digit of the symbol rate displayed to be set.
• Press
to enter the respective digit of the symbol rate needed.
• Repeat the procedure by the quantity of the digits to be set.
Setting the DVB mode
• Use the
button to place the cursor under "
DVB-S
" and set the required
DVB-S2-mode with the
buttons.
• Press the
button.
—> The "Setting the input frequency" – "
FREQ
" menu is activated.
s
et ting
the
inPut
frequenCy
If three dots "
…
" appear in the second line of the display, the cassette is in
the "
station search
" mode. Please wait until the process has finished.
Once the RF receiver has synchronised to the input signal, any offset to the
target frequency is displayed in MHz, e.g. "
– 1.8
".
If a question mark "
?
" appears in the second line of the display, there is no
input signal present. Check the configuration of the antenna system and head-
end station as well as the preceding settings of the cassette.
Bx 4A
11836 -1.8
FREQ
CN 12
• Use the
buttons to position the cursor under the digit of the frequency
displayed to be set.
• Press
to set the input frequency.
• Set the frequency offset shown in the display (e.g. "
– 1.8
") to less than
1 MHz by varying the input frequency using the
buttons.
