GSS HDTV 1000 MPTS Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 46

GSS HDTV 1000 MPTS Скачать руководство пользователя страница 27

Selecting the transmission protocol
• Press the

▶

button to position the cursor under ”

UDP

” or

”

RTP

”.

• Using the

buttons to select the transmission protocol

wished:

“

UDP

” – The User Datagram Protocol is for the connec-

tionless transmission of data to a certain applica-
tion. The port number of the service is also sent
which the data should obtain.

“

RTP

” – The Real-time Transport Protocol is for continu-

ously transmitting multimedia data streams in an
IP network. Unlike UDP, the header is transmitted
which makes the data transmission more robust.

Setting the port number
• Press the

▶

button to position the cursor under the port

number e.g. ”

1234

”.

• Use the

▶

◀

/

buttons to position the cursor under the

digit of the port number displayed to be set.

• Using the

buttons set the port number wished.

• Press the

button.

—> The “Defining the quantity of data packets, setting

the forward error correction, setting the transmission
channel” – “

PKTS / FEC

” menu is activated.

Defining the quantity of data packets
Setting the forward error correction
Setting the transmission channel

In this menu you set the quantity of the data packets to be
transmitted, the forward error correction FEC and the trans-
mission channel. If the forward error correction is used the
data to be transmitted is encoded in a redundant way so that
the addressee can correct transmission errors.

«
...
25
26
27
28
29
...
»

Содержание HDTV 1000 MPTS















































Отзывы:

Нет отзывов