GSS HDMU 790 C, Инструкция по сборке

Страница: 27 / 41

- 27 - HDMU 790 C
s
tation filter
In this menu stations (services) of a transponder can be switched off.
Herein you select which scrambled station should be descrambled using an
adequate CA module.
01/06 Bx 4A TV +
Das Erste
—> All stations from the channel strip will be read, and then displayed
with name and station type.
—> If no station is found, the following message will appear in the dis-
play: " FILTER no Service ". In this case, check the configuration of
the antenna system and head-end station, as well as the previously
adjusted settings for the cassette.
—> The display shows e.g.: Bx 4A TV + 01/06
Das Erste
Meaning of the indicators in the example:
" Bx 4A " Slot 4, channel strip " A "
" TV " TV channel type
" + " The currently selected station is switched on.
" 01/06 " The 1st of 6 stations is being displayed.
" Das Erste " Station name
Further possible terms displayed:
" RA " Radio channel type
For radio stations, the background of the screen of the
connected TV or test receiver is darkened.
" – " The currently selected station is switched off.
" * " The star means that the TV or radio station selected is
scrambled. To enable the station, the CA module and
the appropriate smart card of the station provider are
required.
—> If a service number (e.g. " 131 ") appears instead of " TV " or " RA ",
this indicates that an unnamed station or an undefined data stream
is being received.
• Use the buttons to call up the stations in sequential order, then use
to activate (indicated by " + ") or to deactivate them (indicated by
" – ").