GSS HDMC 1000 MPTS, Руководство по сборке

Страница: 35 / 42

- 35 - PCIM 1000
d
eleting a
Pid
In this menu a PID of the transport stream can be deleted.
Bx 4A
PID 0x0000 DROP
off
• Use the buttons to place the cursor under the respective digit of the
hexadecimal number of the PID to be deleted (" 0x0000 ") and set the hexa-
decimal number using .
• Use to set the cursor to " off " and switch to " on " (delete) using the
buttons.
• Press the button.
—> The "Renaming a PID" – " REMAP " menu is activated.
r
ena ming a
Pid
In this menu you can allocate a new address to a PID retaining the complete
data content.
Bx 4A
0x0000 –> 0000 REMAP
off
• Use the buttons to place the cursor under the respective digit of the
hexadecimal number of the PID to be changed (" 0x0000 ") and set the
hexadecimal number using .
• Use the buttons to place the cursor under the respective digit of the
hexadecimal number of the new PID (" –> 0000 ").
• Set the hexadecimal number using .
• Use to set the cursor to " off " and switch to " on " (rename) using the
buttons.
• Press the button.
—> The "Factory reset" – " FACTORY Defaults " menu is activated.