- 16 -
HDMC 1000 C
5
P
rogramming
5.1 P
rePar ation
•
Test the software versions of the head-end station and the cassette and up-
date them if necessary. The current software versions can be found on the
website "
www.gss.de
".
• Connect the test receiver to the RF output or the test output of the head-end
station.
• Set the output channel / output frequency of the
cassette (page 23) and adjust
the TV test receiver to this channel / frequency.
•
Switch on the channel strip (modulator) if necessary (page 24). For each chan-
nel strip, there is a status LED (page 13) which indicates if the channel strip is
switched on.
• Balance the output levels of the channel strips "
A
" and "
B
" if the difference
in level is
≥
5.2 n
otes
on
level
set ting
In order to prevent interference within the head-end station and the cable sys-
tem, the output level of the cassette must be decreased by 10 dB compared to
analogue cassettes at 64 QAM, and by 4 dB compared to analogue cassettes
at 256 QAM.
• Measure the output levels of the other cassettes and tune them to a uniform
output level using the appropriate level controls or software dependent on
the head-end station used. Please regard the assembly instructions of the
respective head-end station.
Содержание HDMC 1000 C
Страница 43: ... 43 HDMC 1000 C Declaration of CE conformity ...