- 11 -
HDMA 784 C ASI
3.3 C
onneCting
the
Qam
module
H
I
E
D
F
G
Fig. 4
• Connect SAT-IF inputs
E
(input "In A") and
F
(input "In B") on the QAM
module (fig. 4) to the preinstalled F terminals in the rear wall of the head-
end station via the cable inlets
H
using HF cables made on-site or if ap-
plicable connect each to one of the outputs of a retrofitted SAT-IF input
distributor.
• If required connect the ASI input
D
to a corresponding ASI signal source.
• After programming, connect the modulator output
G
to one of the input
sockets
I
of the output collector.
