• Use the
buttons to set the operating voltage for the
CA module.
• Press the
button.
—> The “Setting the PID monitoring” – “
CA
” menu is acti-
vated.
Setting the PID monitoring
The factory default of the PID monitoring is switched on.
If particular PIDs are not decrypted the CI module is reset.
Additionally dropouts may occur if several stations are de-
crypted. To prevent this the PID monitoring can be switched
off.
• Use the
buttons to switch “
off
” or “
on
”. the PID
monitoring.
• Press the
button.
—> The “Configuring the CA module” – “
CA
” menu is acti-
vated.
Bx 4A
PID Check
CA
on
on / off
