Inverting the user signal
For exceptional cases and “older” digital cable receivers, the
spectral position of the user signal can be inverted.
• Use
▶
◀
/
to place the cursor under “
normal
”.
• Use
to set the spectral position to “
inverse
”.
• Press the
button.
—> The “Setting stuffing” – “
STUFFING
” menu is acti-
vated.
Setting stuffing
SR=6900
(= “Number 1”): Active output symbol rate
Bx 4A
SR=6900 (6325)
STUFFING
Number 1 Number 2
(
6325
) (= “Number 2”):
The current measured output symbol rate.
If the station filter is activated, this value is lower than
the value of the “Number 1”. The value fluctuates,
since the data rates of individual stations are dynami-
cally modified by the broadcasters.
• Use the
▶
◀
/
buttons to place the cursor under the
number to be changed (“Number 1”) and set the symbol
rate with the buttons
.
The value set corresponds to the new output symbol rate.
Bx 4A
SR=6900 (6325)
STUFFING
▶
◀
/
