GSS HDM 510 CI TPS, Руководство по сборке

Страница: 20 / 38

- 20 - - 20 -
the bandwidth of the QAM output signal by removing sta-
tions.
Using “SelecPlex ® “ only the frequency setting can be used.
• Use to select channel setting “ Channel ” or frequen-
cy setting “ Freq. ”.
• Press the button.
—> The “Setting the output channel” or “Setting the out-
put frequency” – “
OUTPUT ” menu is activated.
—> If frequency setting is selected continue on page 21 with
“Setting the output frequency”.
Setting the output channel
In this menu you set the output channel of the channel strip.
Additionally the modulator of the channel strip can be
switched off or on (page 21).
• Use the buttons to set the output channel.
Bx 4A
Channel
OUTPUT
Channel / Freq.
Bx 4A
S21
OUTPUT
on
on / off
▶ ◀
/