4 The control panel at a glance
4.1 Menu items
Program the cassette using the buttons on the control unit of the head-end station.
The two-line display of the control unit then shows the menus.
The parameters and functions to be set are underlined.
Use the
key to select the following main menu items:
– Channel strip
– Selecting channel / frequency setting
– Output channel / output frequency
– Output level
– LNB oscillator frequency
– Input symbol rate
– Input frequency
– Station filter
– QAM modulation
– Stuffing
– Substitute signal
– Network Information Table (NIT)
4.2 Control panel
The key pad on the head-end station is used to scroll through the menus and
menu items one at a time:
scrolls forward through the menus.
▶
◀
/
select parameters in the menus.
set values, initiate actions.
selects sub-menus.
AUDIO
scrolls backward through the menus.
M
saves all entries.
BE–Remote
V 37
please wait . . .
