- 23 -
HDM 2380 P CI / HDM 2380 OIRT CI
Setting the input symbol rate
The symbol rates of the satellite transponders can be found in the current chan-
nel table of the satellite operator, in various satellite magazines and in the
Internet.
Bx 4A
/B
27500
SYMBOL
• Using the
button the symbol rates
22000
“ or ”
27500
“ can be
selected directly.
• To set another symbol rate use the
buttons to position the cursor
under the digit of the symbol rate displayed to be set.
• Press
to enter the respective digit of the symbol rate needed.
• Repeat the procedure by the quantity of the digits to be set.
• Press the
button.
—> The “Setting the input frequency” – “
FREQ
” menu is activated.
Setting the input frequency
Reception quality
If three dots “
…
“ appear in the second line of the display, the cassette is in
the “
station search
” mode. Please wait until the process has finished.
Once the HF receiver has synchronised to the input signal, any offset to the
target frequency is displayed in MHz, e.g. “
– 1.8
”.
If a question mark “
?
” appears in the second line of the display, there is no
input signal present. Check the configuration of the antenna system and head-
end station as well as the preceding settings of the cassette.
Additionally the signal to noise ratio (C/N) of the signal received is displayed
(e.g. ”
CN 12
” dB).
Bx 4A
/B
11953 -1.8
FREQ
CN 12
