Chapter 2: General Information
Tower Erection
1. The tower is assembled vertically with various sections depending on the required height.
2. The tower sections should not be assembled by lifting on the sides.
3. The tower is designed with each section in a specific location, it is critical to assemble the tower with
the correct members in each section.
4. Square each section and then tighten the hardware before stacking the next section.
5. The shipping bolts should not be used in the tower assembly.
Figure 2-7
Stacking the sections – tower erection
PNEG-2115
2-Leg and 4-Leg Towers
19
