Chapter 2: General Information
Bin Guy Kit for 2-Leg Towers
1. The bin guy kit has a clamp that will fit around the column and a plate that will require field drilling to
the nearest bin stiffeners.
2. The clamp should be attached close to a shear plate.
3. The guy bracket should not be attached at the stiffener splice.
Figure 2-4
Bin guy kit for 2-leg towers
Seal Plate Kit
1. The seal plate kits may not be shipped with every tower.
2. If needed, it is installed on top of each of the 2-leg or 4-leg tower columns to prevent water or trash
buildup inside of the column.
Figure 2-5
Seal plate kits
PNEG-2115
2-Leg and 4-Leg Towers
17
