background image

1. Safety

6

PNEG-765

 In-Line Intermediate Discharge Gates

Stay Clear of Moving Parts

Keep arms and hands away from slide gate opening. Slide gate can 
crush and dismember. Motor may start at any time.

Always stop and lock out power source before making adjustments, 
cleaning, or maintaining equipment.

Slide Hazard

Prepare for Emergencies

Be prepared if fire starts.

Keep a first aid kit and fire extinguisher handy.

Keep emergency numbers for doctors, ambulance service, 
hospital, and fire department near your telephone.

Keep Emergency Equipment 
Quickly Accessible

Wear Protective Clothing

Wear close-fitting clothing and safety equipment appropriate
to the job.

Remove all jewelry.

Tie long hair up and back.

Wear safety glasses at all times to protect eyes from debris.

Wear gloves to protect your hands from sharp edges on 
plastic or steel parts.

Wear steel-toed boots to help protect your feet from falling 
debris. Tuck in any loose or dangling shoestrings.

A respirator may be needed to prevent breathing potentially 
toxic fumes and dust.

Wear a hard hat to help protect your head.

Wear appropriate fall protection equipment when working at 
elevations greater than six feet (6').

Eye Protection

Gloves

Steel-Toed Boots

Respirator

Hard Hat

Fall Protection

Содержание PNEG-765



















Отзывы: