background image

4

PNEG-765

 In-Line Intermediate Discharge Gates

1. Safety

Safety Guidelines

This manual contains information that is important for you, the owner/operator, to know and understand. 
This information relates to protecting

 personal safety 

and 

preventing equipment problems.

 It is the 

responsibility of the owner/operator to inform anyone operating or working in the area of this equipment 
of these safety guidelines. To help you recognize this information, we use the symbols that are defined 
below. Please read the manual and pay attention to these sections. Failure to read this manual and its 
safety instructions is a misuse of the equipment and may lead to serious injury or death.

DANGER

WARNING

CAUTION

NOTICE

This is the safety alert symbol. It is used to alert you 
to potential personal injury hazards. Obey all safety 
messages that follow this symbol to avoid possible 
injury or death.

WARNING

 indicates a hazardous situation which, if not 

avoided, could result in death or serious injury.

CAUTION, 

used with the safety alert symbol, indicates a 

hazardous situation which, if not avoided, could result in 
minor or moderate injury.

NOTICE

 is used to address practices not related to 

personal injury.

DANGER

 indicates a hazardous situation which, if not 

avoided, will result in death or serious injury.

Содержание PNEG-765



















Отзывы: