GSi PNEG-2309, Инструкция по установке и эксплуатации

Страница: 28 / 58

Chapter 4: Mixer Assembly
Installing the Center Cover
1. Apply 1/8" x 1" thick sponge sealant (25) along the outside tub (27) edge, if not already installed.
2. Install the center cover (26) to the tub (27) using 3/8" x 1" HHCS bolts (1), 3/8" flat washers (14) and
3/8" flange nuts (21).
Figure 4-2 Installing the center cover
1
3/8" x 1" HHCS bolt (S-7104)
25
1/8" x 1" thick sponge sealant
14
3/8" flat washer (S-7021)
26 Center cover
21
3/8" flange nut (S-8032)
27 Tub
3. Install the chemical injection plate (28) onto the 3/8" x 1" welded bolts (2) of the center cover (26)
and fasten with 3/8" flange nuts (21).
Figure 4-3 Installing the chemical injection plate
2
3/8" x 1" welded bolt (S-20438)
26 Center cover
21
3/8" flange nut (S-8032)
28
Chemical injection plate
28 PNEG-2309 Horizontal Fertilizer Mixer