GSi PNEG-1724 Скачать руководство пользователя страница 9

1. Safety

PNEG-1724

 S2 Quick Start Guide Canister

9

Operator Qualifications

A. The User/Operator must be competent and experienced to operate auger equipment. Anyone who 

works with or around augers must have good common sense in order to be qualified. These persons 
must also know and meet all other qualifications, such as:

i. Any person who has not read and/or does not understand all operation and safety procedures 

is not qualified to operate any auger systems.

ii. Certain regulations apply to personnel operating power machinery. Personnel under the age of 

18 years may not operate power machinery, including augers. It is your responsibility, as owner 
and/or supervisor, to know what these regulations are in your area or situation.

iii. Unqualified or incompetent persons are to remain out of the work area.

iv. O.S.H.A. (Occupational Safety and Health Administration) regulations state: “At the time of 

initial assignment and at least annually thereafter, the employer shall instruct every employee 
in the safe operation and servicing of all equipment with which the employee is, or will be 
involved”. (Federal Occupational Safety and Health Standards for Agriculture. Subpart D, 
Section 1928.57 (a) (6)).

B. As a requirement of O.S.H.A., it is necessary for the employer to train the employee in the safe 

operating and safety procedures for this auger. The sign-off sheet is provided for your convenience 
and personal record keeping. All unqualified persons are to stay out of the work area at all times. It 
is strongly recommended that another qualified person who knows the shut down procedure is in the 
area in the event of an emergency.

Date

Employee Name 

Supervisor Name

Содержание PNEG-1724

















Отзывы: