GSi Cumberland Hi-Lo, Инструкция по установке и эксплуатации

Страница: 39 / 104

7. Installation
PNEG-250 Hi-Lo and PRO-1 Pan Feeders 39
10. Place the clip into the preferred notch. (See Figure 7AY.)
Visually check that the clip is securely in a notch. If the clip does not fit into the slot, the feed level
can lower and the clip can become fixed out of the notches (F). If the clip becomes fixed while out of
a slot, the feed flow can stop. It will be difficult to return the clip (G) to a slot if it becomes fixed while
out of a slot.
Optimum results will be obtained by maintaining as shallow of feed depth as possible, while still
having sufficient feed flow ability. This is normally 3 or 4 notches showing.
Figure 7AY
11. Spread the hold-down clip and slide it over the feed level stand. (See Figure 7AZ and Figure 7BA.)
Figure 7AZ
Figure 7BA
12. Place the feed level on the assembly. (See Figure 7BB.)
Figure 7BB
F
G
Ref # Description
F Notches
G Clip