![GSi AUDIOSTAR PRO Скачать руководство пользователя страница 32](http://html1.mh-extra.com/html/gsi/audiostar-pro/audiostar-pro_user-manual_2275124032.webp)
D-0100778 Rev C
31
Talk Forward
This rotary control allows the operator to adjust the microphone intensity in a
continuous range of 45 to 90 dB HL when communicating through Talk Forward.
Note
: The talk forward mic may be calibrated using the mic level select
The Talk Forward Button allows the operator to speak directly to the patient
using the Mic/Monitor headset or optional gooseneck microphone. Pressing and
holding the Talk Forward button interrupts the stimulus that is being presented
and activates the microphone in all selected transducers on Channel 1 and
Channel 2. The GSI AudioStar Pro resumes the test status when the pushbutton is
released. The light pipe around the Talk Forward button will be illuminated when
enabled.
Left & Right VRA
When an external Visual Reinforcement Audiometry (VRA) remote box is
plugged into the VRA jack, and the Left or Right VRA button is pressed and
held, it will activate the VRA toy in the corresponding position. Pressing both
Right and Left VRA together will activate the Center position on compatible
VRA systems.
Interlock
The Interlock pushbutton locks the presentation function of the two channels
together so that stimulating one channel will also stimulate the other, according
to the status of the Interrupt button. When the Interlock is active, an icon is
displayed on the LCD and the light pipe around the button is illuminated.
Tracking
The Tracking pushbutton allows the Channel 2 hearing level to track the Channel
1 hearing level. When in Tracking, any dB change to the Channel 1 HL causes
the Channel 2 HL to change by the same amount, until the limit of the Channel 1
transducer is reached. If the dB HL limit is reached in Channel 2 before Channel
1, the Channel 2 dB HL display will temporarily flash and remain at this level.
Tracking remains on. When the Channel 1 dB returns to a level at which the
selected difference between the two channels can resume, Channel 2 again tracks
Channel 1. When tracking is selected, an icon will appear on the screen and the
light pipe will be illuminated. It is possible to manually change the intensity of
Channel 2 to alter the dB difference between the two channels without
deselecting Tracking.