GSI AudioStar Pro™ Clinical Audiometer
30
D-0100778 Rev C
Chapter 4: Front Panel Controls
The controls on the front panel of the GSI AudioStar Pro are shown below.
Power
The green LED, located in the upper right portion of the front panel, is
illuminated when mains power is supplied to the GSI AudioStar Pro. This
indicates that the power switch is in the on position.
Stimulus Intensity Level(s)
Test Mic, Input A and Input B Level Controls
— To calibrate the test signal
for the test microphone or the external devices, use the Select button to activate
the LED associated with the device. Then use the rotary knob to adjust the signal
intensity until an indication of 0 dB on average is obtained on the selected
channel VU meter.