GSi Agri-Alert 128 Touch, Руководство по установке и настройке

Страница: 55 / 120

Chapter 8: Configuring a Temperature Zone
Enabling the Internal Speaker
The internal speaker allows you to hear the alert messages from the system when you are near the main
system.
In edit mode, under the Action tab of the zone you are configuring, click on the edit field next to the
speaker icon .
A check mark indicates the internal speaker is enabled.
Recording the Zone Audio Label
The audio label is the name the system repeats to identify the zone when calling because an alert is set off
in the zone.
1. In edit mode, under the Mess. tab of the zone you are configuring, click on the record icon .
NOTE: The time remaining to record the audio label starts counting down once you press the record
button.
Tip
For consistency, use the same words as you used when giving the Name in the zone’s General tab.
2. State the zone audio label clearly.
NOTE: The recording stops when it has reached the allowed time of 8 seconds.
3. Click on the play icon to listen to the recording.
4. If the recording is not satisfactory, press the garbage icon to delete the recording and start over.
5. Repeat steps 2 through 5 to record the zone audio label in another language.
Resetting the Daily Minimum and Maximum
The system monitors and constantly updates the minimum and maximum values reached within a 24 hour
period. The time of the recorded minimum and maximum values is displayed. After 24 hours, the values
are reset and the monitoring starts anew.
In status mode, under the General tab in the zone you are configuring, click on the Reset min/max .
The information beside the Max 24h and Min 24h buttons is reset.
895–00677 Agri Alert 128 Touch 55