GSI Group PNEG-1451, Руководство по установке

Страница: 52 / 118

6. 2.66" Corrugated Commercial Hopper Tank 10-22 Rings
52 PNEG-1451 Ladder, Safety Cage and Platform for Hopper Tanks
Right Hand Platform and Platform Support Assembly
NOTE: Mount the platform supports (A) on the bin first. Next, assemble the platform floor (M) onto the
support frame. Do not tighten platform support (A) to floor brace (E) bolts until the floor and toe
plates (K) are secure.
Assemble the platform support (A) frame using 5/16" x 3/4" truss head bolts and nuts. (See Figure 5I
on Page 29.) When attaching the platform mounting angles (C) to the sidewall, locate the mounting
angles (C) according to the instructions on previous pages. Align holes on the platform floor (M) with the
holes on the platform supports (A) and bolt together using 5/16" x 3/4" truss head bolts and nuts. Attach
platform toe plates (K) at the same time as attaching the platform floor (M). The vertical entrance angle
bolts to the platform floor (M), toe plate (K) and platform support (A). The handrail post bolts to the platform
floor (M) and toe plate (K) as shown in
Figure 6K on Page 53 .
Figure 6J Right Hand Platform Support Assembly
Ref # Part # Description
A LS-6698 Platform Support (2)
B LS-6699 Left Hand Diagonal Support Angle (Brown) (1)
C TDP-5008N Platform Mounting Angle (Fluorescent Green/Black) (2)
D LS-6700 Right Hand Diagonal Support Angle (Blue) (1)
E LS-6701 Floor Brace (Orange) (3)
F Use upper hole in diagonal brace when connecting to platform support.
G Upper Hole