GSI Group PNEG-1451, Руководство по установке

Страница: 35 / 118

5. 2.66" Corrugated Commercial Hopper Tank 4-9 Rings
PNEG-1451 Ladder, Safety Cage and Platform for Hopper Tanks 35
Left Hand Platform and Platform Support Assembly
NOTE: Mount the platform mounting angles (C) on the columns first. Next, assemble the platform floor (M)
onto the support frame. Do not tighten platform support (A) to floor brace (E) bolts until the
floor (M) and toe plates (K) are secure.
Assemble the platform support (A) frame using 5/16" x 3/4" truss head bolts and nuts. Align holes on the
platform floor (M) with the holes on platform supports (A) and bolt together using 5/16" x 3/4" truss head
bolts and nuts. Attach platform toe plates (K) at the same time as attaching the platform floor (M). Vertical
entrance angle (H) bolts to the platform floor (M), toe plate (K) and platform support (A). Handrail post bolts
to the platform floor (M) and toe plate (K) as shown in
Figure 5S on Page 36 .
Figure 5R Left Hand Platform Support Assembly
Ref # Part # Description
A LS-6698 Platform Support (2)
B LS-6699 Left Hand Diagonal Support Angle (Brown) (1)
C TDP-5008N Platform Mounting Angle (Fluorescent Green/Black) (2)
D LS-6700 Right Hand Diagonal Support Angle (Blue) (1)
E LS-6701 Floor Brace (Orange) (3)
F Use upper hole in diagonal brace when connecting to platform support.
G Upper Hole